Installing OmniOSce on Contabo Servers DS1, DS2, and DS3 (Ryzen 9 7900)

Voici l'article que j'ai publié sur le forum UnitedBSD :

Hello everyone!

After the "Dual 10-Core Intel Xeon (E5-2630v4)", I tried a new one.

So I also tested the standard range : DS1, DS2, DS3 :

I just installed OmniOSce following the same procedure as for the "Dual 10-Core Intel Xeon (E5-2630v4)"
(refer to the article about it on this forum).
Use the Debian Rescue mode and remotely write the cloud.raw image using dd.

I just configured it as a small hypervisor server (bhyve) for my students.
It works very well !

Here are the specs : 

root@omnios:~# prtdiag
System Configuration: primeLine Solutions 1U4LW-B650/P
BIOS Configuration: American Megatrends International, LLC. 1.10.PL01 09/05/2023
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)

==== Processor Sockets ====================================

Version Location Tag
-------------------------------- ---------------------------
AMD Ryzen 9 7900 12-Core Processor CPU1

==== Memory Device Sockets ================================

Type Status Set Device Locator Bank Locator
------- ------ --- -------------------- -----------------
DDR5 in use 0 DIMM 0 P0 CHANNEL A
DDR5 in use 0 DIMM 1 P0 CHANNEL A
DDR5 in use 0 DIMM 0 P0 CHANNEL B
DDR5 in use 0 DIMM 1 P0 CHANNEL B

==== On-Board Devices =====================================

To Be Filled By O.E.M.

==== Upgradeable Slots ====================================

ID Status Type Description
--- --------- ---------------- --------------------------
0 available PCI Express PCIE7
1 available PCI Express PCIE6
2 unknown PCI Express PCIE4
3 in use PCI Express M2_2

root@omnios:~# prtconf | grep Memory
Memory size: 130244 Megabytes
↑ Haut de page